Made in USA The EMP series electromagnets feature a low profile height of 1/2″ for the EMP-1-1/2 series and 3/4″ for the EMP-2 series.
Multiple pole design and large pole area create a shallow field depth with excellent pounds-per-square-inch ratings that enhance performance on thin material.
Can be used as a single unit for small work or in multiples on a spreader bar for larger workpieces.
EMP series electromagnets are able to lift one sheet at a time off a stack when used in conjuction with rectifier-controllers equipped with variable power.
Model #EMP 1-1/2 Series Electromagnets – 12 VDC
Cross-section of all units: 1/2″ thick x 1-1/2″ wide – Units mounted using #10 socket head screws.
Specifications
Model #EMP 1-1/2 Series Electromagnets - 12 VDC| Model | "A" Length | Watts | Net Weight |
| EMP 1-1/2-1-12 | 1-1/2" dia | 3.8 | 2 oz |
| EMP 1-1/2-3-12 | 4-3/4" | 8.4 | 5 oz |
| EMP 1-1/2-4-12 | 6" | 11.2 | 14 oz |
| EMP 1-1/2-6-12 | 8-1/2" | 16.8 | 1 lb, 3 oz |
| EMP 1-1/2-9-12 | 12-3/8" | 25.7 | 1 lb, 10 oz |
Pounds Pull vs Metal Thickness
Model #EMP 1-1/2 Series Electromagnets - 12 VDC| Model | 31 ga. | 28 ga. | 20 ga. | 16 ga. | 11 ga. | 7 ga. |
| .0105 | .0149 | .0359 | .0598 | .1196 | .1793 | |
| EMP 1-1/2-1-12 | .5 lbs | 1.5 lbs | 6 lbs | 11 lbs | 24 lbs | 30 lbs |
| EMP 1-1/2-3-12 | 4 | 5.5 | 20 | 40 | 94 | 114 |
| EMP 1-1/2-4-12 | 4 | 6 | 22 | 50 | 120 | 145 |
| EMP 1-1/2-6-12 | 5.5 | 8.5 | 27 | 71 | 171 | 209 |
| EMP 1-1/2-9-12 | 8 | 13 | 43 | 105 | 250 | 307 |
Any group of 12 volt electromagnets to be energized by a single rectifier-controller should not exceed 100 watts.
- Automated systems require “AU Series” Rectifier-Controllers
- Manual applications require “MA or MR Series” Rectifier-Controllers
- Consult factory for applications information and optional magnet and controller configurations.
Model #EMP 2 Series Electromagnets – 110 VDC
Cross-section of all units: 3/4″ thick x 2″ wide – Units mounted using 1/4″ socket head screws.
Specifications
Model #EMP 2 Series Electromagnets - 110 VDC| Model | "A" Length | Watts | Net Weight |
| EMP 2-1-110 | 2" dia | 3.9 | 9 oz |
| EMP 2-4-110 | 8" | 16 | 3 lbs |
| EMP 2-6-110 | 12" | 24 | 4 lbs, 5 oz |
| EMP 2-8-110 | 16" | 31 | 6 lbs |
Pounds Pull vs Metal Thickness
Model #EMP 2 Series Electromagnets - 110 VDC| Model | 31 ga. | 28 ga. | 20 ga. | 16 ga. | 11 ga. | 7 ga. |
| EMP 2-1-110 | 1 lbs | 1.5 lbs | 6 lbs | 16 lbs | 42 lbs | 66 lbs |
| EMP 2-4-110 | 4 | 7 | 23 | 64 | 171 | 266 |
| EMP 2-6-110 | 6 | 10 | 35 | 100 | 260 | 400 |
| EMP 2-8-110 | 8.5 | 15 | 55 | 120 | 320 | 505 |
