Rotary electromagnetic chucks are available with concentric ring or radial pole style configurations. Concentric ring style electromagnetic chucks are used for general purpose grinding and holding workpieces nested together. Radial pole electromagnetic chucks are used primarily for holding rings and discs such as bearing races and circular saw blades.

Rotary chucks are used on rotary grinders, lathes, cylindrical grinders, and other machines. Collector rings and brush holders are optional. Chucks are provided with 24 inch lead out bottom center. Voltage requirements for all chucks is 110 VDC. Other D.C. voltages are available upon request.

ECC Style Concentric Ring

ECC Style Concentric Ring

Rotary Electromagnetic Chucks

Rotary Electromagnetic Chucks

ECR Style Radial Pole

ECR Style Radial Pole

Ordering Information

Rotary Electromagnetic Chucks

ModelABCDEFWattsHeight
EEC/ECR 66-1/463-1/24-1/2(4) 3/8-16 x 3/8 dp.3-3/43024 lbs
ECC/ECR 88-1/483-1/24-1/2(4) 3/8-16 x 3/8 dp.3-3/45045 lbs
ECC/ECR 1010-1/4103-1/28(4) 3/8-16 x 5/8 dp.6-3/48070 lbs
ECC/ECR 1212-1/4123-1/28(4) 3/8-16 x 5/8 dp.795100 lbs
ECC/ECR 1414-1/41448(4) 3/8-16 x 3/4 dp.7130160 lbs
ECC/ECR 1616-1/416412(4) 3/8-16 x 3/4 dp.8175205 lbs
ECC/ECR 1818-1/4184-1/212(6) 1/2-13 x 3/4 dp.8230290 lbs
ECC/ECR 202019-3/44-1/212(6) 1/2-13 x 3/4 dp.8300360 lbs
ECC/ECR 252524-3/44-1/212(6) 1/2-13 x 3/4 dp.8490560 lbs
ECC/ECR 3030-1/2305-1/812(6) 1/2-13 x 3/4 dp.86001030 lbs
ECC/ECR 3636-1/2365-1/812(6) 1/2-13 x 3/4 dp.86501400 lbs