Magnetic Blocks
Many Uses • Never Need Remagnetizing
Multiple-pole magnetic blocks have unlimited uses. Blocks have mounting holes* for attaching to surfaces where magnetic holding devices are needed. Blocks may also be drilled and tapped for fastening to spotlights, shop worklights, service lights, nozzles, indicators, etc. Simple cam or jack-screw release can be supplied.
*Hole Sizes for "B" Blocks
B75: (2) holes drilled and counterbored for #8 SHCS
B125 & B175: (2) holes drilled and counterbored for #10 SHCS
B450: (1) 1/2-13 tapped hole in center of back
B1047: (1) 3/8-16 tapped hole in center
Ordering Information
| Part # | Height | Width | Length | Hole C.D. | Holding Power |
|---|---|---|---|---|---|
| B75 | 1-3/16" | 1-5/16" | 2-7/16" | 2" | 75 lbs |
| B125 | 1-1/4" | 1-1/2" | 3-3/8" | 2-7/8" | 125 lbs |
| B175 | 1-3/16" | 2-1/16" | 3-9/16" | 3" | 175 lbs |
| B450 | 1-3/4" | 2-7/8" | 4-1/4" | ** | 450 lbs |
| B1047 | 1-1/2" | 2-1/2 dia. | - | - | 125 lbs |
**Holes may be drilled 5/8" deep on back face.
