Lifts: Battery Operated Lifts
You are here: Home | Lifts
| Battery Operated Lifts
Versatile, Compact and Fully Portable
|
|
|
Model BL-2000 Battery
Operated Lift Magnet
|
Model BL-5000 Battery
Operated Lift Magnet with optional Remote Control
|
All Magnetool Battery Operated Lift Magnets are versatile,
compact and fully portable. Their self contained power source
allows them to be operated anywhere - inside or outside
the plant. Chains and slings are unnecessary. Operation
of these magnets does not depend on an electric power source.
Additional Features: Heavy duty On-Off Release Switch located
in front and recessed for safety, yet easy to reach. A Safe
Charge Indicator tells at a glance the charge condition
of the battery. Built-In Battery Charger plugs into any
115 Volt A.C. outlet. All Units are available with optional
Remote Control using a heavy duty, hand held drum switch
on a 6'-0" cord. (Must be specified at time of order.)
Battery Lifts are complete with a 12 volt charger, automotive
type battery and charger cable.
LIFTING RECOMMENDATIONS
These units are designed to handle high density materials
such as thick steel plates, blocks, smooth surfaced forgings,
steel and cast iron castings, heavy, rigid, flat structural
steel, burnouts, etc. They are extremely useful in lifting
heavy work on and off grinders, mills, drill presses etc.
Material such as light gauge sheet metal or any material
that bends of flexes excessively, small parts, shavings,
turnings, scrap, etc. cannot be handled efficiently by this
type of magnet. Battery Lift Magnets are rated using a machined,
flat, low carbon steel plate. The test plate used for Battery
Lift 2000 and 3000 is a minimum of 1-1/4" thick; on
Battery Lift 5000, 11000 and 11500 the test plate is 2"
thick. From this breakaway test the magnets are derated
by 50%. Material thinner than the test plate may be handled
safely but consideration must be given to reduced holding
capacity of the magnet. As the material becomes thinner,
there is less mass the magnetic force has to act on. Always
snatch the load as close to the floor as possible to assure
positive contact and a clean lift.
 ORDERING
INFORMATION
 |
BATTERY OPERATED LIFTS
|
|
|
|
VOLTS
|
|
|
|
|
|
|
|
|
BL-2000
|
12 VDC
|
2000 lbs
|
8-3/4"
|
8-3/4"
|
9-3/4"
|
12-1/4"
|
-
|
84 lbs.
|
|
BL-3000
|
12 VDC
|
3000 lbs.
|
9-1/2"
|
11-1/2"
|
12-1/2"
|
18-1/2"
|
-
|
135 lbs.
|
|
BL-5000
|
12 VDC
|
5000 lbs.
|
8"
|
16-3/4"
|
13-1/4"
|
19-1/4"
|
-
|
225 lbs.
|
|
BL-11000
|
12 VDC
|
11,000 lbs.
|
10-1/4"
|
48"
|
14"
|
21-1/2"
|
-
|
500 lbs.
|
|
BL-11500
|
12 VDC
|
11,000 lbs.
|
17-3/4"
|
29-1/2"
|
14"
|
22"
|
-
|
500 lbs.
|
|
BIPOLAR BATTERY OPERATED LIFTS
|
|
|
MODEL
|
VOLTS
|
CAPACITY
|
A
|
B
|
C
|
D
|
E
|
WEIGHT
|
|
BP-BL-2500
|
12 VDC
|
2500 lbs.
|
6-1/2"
|
17"
|
22-1/4"
|
26"
|
24-3/4"
|
300 lbs.
|
|
BP-BL-5000
|
12 VDC
|
5000 lbs.
|
8"
|
24"
|
17-1/4"
|
25-1/8"
|
23-5/8"
|
400 lbs.
|
|
BP-BL-10,000
|
24 VDC
|
10,000 lbs.
|
12"
|
48-1/4"
|
19-3/4"
|
28-1/4"
|
25-3/4"
|
1500 lbs.
|
|
