Surface Type Demagnetizers

surface type demagnetizer

Single Phase A.C.

Surface type Demagnetizers are commonly used to demagnetize parts or plates under 1 inch thick. They can be used manually or under conveyor belts and chutes to demagnetize parts one layer thick.

Units not exceeding 35 amperes are equipped with a plug. Units over 35 amperes are arranged for permanent connection.

surface type demagnetizer

Features

  • Durable Surface Plates
  • Carrying handles
  • On-off switch
  • Continuous Duty

To operate: Turn the demagnetizer ON. Pass the work across the top of the demagnetizers; for thick pieces it may be necessary to demagnetize both sides. Do not turn the unit "OFF" with the workpiece still in the magnetic field or re-magnetizing will result.

Ordering Information

Request a Quote

*Specify voltage at time of order*
Consult the factory for special demagnetizing applications.

Surface Type Demagnetizers
Model Length Width Height 115 VAC 230 VAC 460 VAC Net Weight lbs
DM-3 8-3/4 4-3/4 3-5/8 4 Amps - - 16
DM-4 12-3/4 6-5/8 4-7/8 9 Amps 4.5 Amps - 45
DM-6 14-3/8 9-1/8 6-1/4 - 16 Amps 8 Amps 110
DM-7 18 17 8-3/4 - 44 Amps 22 Amps 330