# Permanent Magnetic Chucks

## High Power Standard Pole Permanent Magnet Chucks

Permanent magnet chucks are built using high power Ceramic V magnets. Top plates of 3/8 inch magnetic steel and 3/8 inch nonmagnetic stainless steel are furnace brazed, making a solid, one piece construction. They can be drilled to a depth equal to the thickness of the top plate minus 1/8 inch . Drilling or machining can be done between poles or anywhere in the top plate except where the screws secure the plate to the base. There are no magnets in the top plate. Handles on all permanent magnetic chucks are removable.

## Ordering Information

Permanent Magnetic Chucks | |||||
---|---|---|---|---|---|

Model | Size | Height | Base | Work Area | Weight |

inches | inches | inches | inches | lbs. | |

SP36-25 | 3 x 6 | 2-5/16 | 3-1/2 x 6-7/8 | 3-7/16 x 6-1/4 | 8 |

SP48-37 | 4 x 8 | 2-7/16 | 4-1/8 x 8-11/16 | 4-3/16 x 8-3/16 | 15 |

SP510-37 | 5 x 10 | 2-7/16 | 5 x 11 | 5-1/16 x 10-1/2 | 24 |

SP66-37 | 6 x6 | 2-5/16 | 6 x 7 | 6-3/16 x 6-1/4 | 19 |

SP610-37 | 6 x 10 | 2-7/16 | 6 x 10-1/4 | 6-3/16 x 10-3/8 | 28 |

SP612-37 | 6 x 12 | 2-7/16 | 6 x 12-3/4 | 6-3/16 x 12 | 32 |

SP614-37 | 6 x 14 | 2-5/8 | 6 x 14 | 6-3/16 x 14-1/4 | 46 |

SP618-37 | 6 x 18 | 2-7/16 | 6 x 18-5/8 | 6-3/16 x 18 | 54 |

SP815-37 | 8 x 15 | 2-3/4 | 8 x 15-13/16 | 8-3/16 x 15-1/4 | 64 |

SP824-37 | 8 x 24 | 2-11/16 | 8-1/8 x 24-5/8 | 8-3/16 x 24-1/8 | 103 |

SP1015-37 | 10 x 15 | 2-7/8 | 10 x 15-3/4 | 10-3/16 x 15-1/8 | 85 |

SP1212-37 | 12 x 12 | 2-3/4 | 12-1/8 x 13-1/2 | 12-1/8 x 12-1/8 | 100 |

SP1218-37 | 12 x 18 | 3 | 12-1/8 x 18-3/4 | 12-1/4 x 18-5/16 | 140 |

## High Power Fine Pole

This chuck has poles of 1/8" magnetic steel and 1/8" nonmagnetic stainless steel. The top plate is furnace brazed, making a solid, one piece unit. It can be drilled or machined to a depth equal to the thickness of the top plate minus 1/8". Machining can be done between poles or anywhere in the top plate except where the screws securethe plate to the base. The magnetic circuit allows excellent holding of thin work as well as the power necessary to hold large work pieces.

## Ordering Information

Permanent Magnetic Chucks | |||||
---|---|---|---|---|---|

Model | Size | Height | Base | Work Area | Weight |

inches | inches | inches | inches | lbs | |

FP-48-12 | 4 x 8 | 2-5/8 | 4-1/8 x 8-11/16 | 4-3/16 x 8-3/16 | 16 |

FP-510-12 | 5 x 10 | 2-11/16 | 5 x 11 | 5-3/16 x 10-1/2 | 25 |

FP-66-12 | 6 x 6 | 2-1/4 | 6 x 7 | 6-3/16 x 6-1/4 | 22 |

FP-610-12 | 6 x 10 | 2-5/8 | 6 x 10-1/4 | 6-3/16 x 10-1/2 | 32 |

FP-612-12 | 6 x 12 | 2-5/8 | 6 x 12-3/4 | 6-3/16 x 12 | 38 |

FP-614-12 | 6 x 14 | 2-7/8 | 6 x 14 | 6-3/16 x 14 | 48 |

FP-618-12 | 6 x 18 | 2-3/4 | 6 x 18-5/8 | 6-3/16 x 18 | 62 |

FP-815-12 | 8 x 15 | 2-3/4 | 8 x 15-3/16 | 8-3/16 x 15-1/4 | 64 |

FP-818-12 | 8 x 18 | 2-7/8 | 8 x 17-3/4 | 8-3/16 x 17-7/8 | 77 |

FP-824-12 | 8 x 24 | 2-11/16 | 8-1/8 x 24-5/8 | 8-3/16 x 24-1/8 | 106 |

FP-1015-12 | 10 x 15 | 2-7/8 | 10 x 15-3/4 | 10-3/16 x 15-1/8 | 85 |

FP-1212-12 | 12 x 12 | 2-3/4 | 12-1/8 x 13-1/2 | 12-1/8 x 12-1/8 | 100 |

FP-1218-12 | 12 x 18 | 3 | 12-1/8 x 18-3/4 | 12-1/4 x 18-1/2 | 140 |