Magnetool Inc. HomeLiftsElectromagnetic Filters Electromagnetic SweepersElectromagnetic Chucks and Sine PlatesElectromagnetic Rectifier ControllersElectromagnetsElectromagnetic Repair FacillitiesMagnetool Contact Information

Chucks and Sine Plates: Rotary Chucks and Parallels

You are here: Home | Chucks and Sine Plates | Rotary Chucks and Rotary Parallels

 

Quick Links:

High Power Rotary Magnet Chucks

Rotary Paraellels and V-Blocks

 

 

High Power Rotary Magnet Chucks

 

Rotary chucks operate the same as the rectangular chucks and are of the same construction with poles running off the edge. Top plates on all models are of magnetic steel and nonmagnetic stainless furnace brazed construction. Ideally rotating spindles. To withstand the high torque of used on lathes, grinders and other machinery with heavy lathe cuts, dowel pins or screws may be inserted in the top plate. Chuck top plates may be machined for work with odd configurations or an auxiliary plate may be added and removed for other work, leaving the original plate intact.

 

The ST series is not water-tight and should not be used with coolant. Handles are removable.


ORDERING INFORMATION
 

HIGH POWER STANDARD POLE MAGNET CHUCKS

MODEL

DIMENSION IN INCHES

NO. OF HOLES

POLE SPACING

WEIGHT IN LBS.

A

B

C

D

E

F

*ST 2-1/2 R

2-5/8

2-9/16

1-7/8

2

1/4-20 x 3/8

1-5/8

2

1/8

1-1/2

*ST 4-1/8 R

4-3/16

4-1/8

2-3/16

3-3/4

1/4-20 x 3/8

3

3

1/4

5

*ST 5-1/4 R

5-3/8

5-1/4

1-15/16

4-3/4

1/4-20 x 3/8

4

4

3/8

7-1/2

SP 6 R

6-5/16

6-3/16

2-13/16

4-1/2

3/8-16 x 3/8

3-3/4

4

3/8

15

SP 8 R

8-1/8

8

2-13/16

4-1/2

3/8-16 x 3/8

3-3/4

4

3/8

27

SP 10 R

10-1/4

10

3-3/4

8

3/8-16 x 5/8

6-3/4

4

3/8

49

SP 12 R

12-1/8

12

3

8

3/8-16 x 1/2

7

4

3/8

63

SP 16 R

16-1/8

16

3-1/2

12

3/8-16 x 1/2

8

4

3/8

140

SP 20 R

20-1/4

20

3-5/8

16

3/8-13 x 1/2

10

4

3/8

205

* Swing Type Shutoff

 

ORDERING INFORMATION


HIGH POWER FINE POLE MAGNET CHUCKS

MODEL

DIMENSIONS IN INCHES

NO. OF HOLES

POLE SPACING

WEIGHT IN LBS.

A

B

C

D

E

F

FP 6 RD

6-5/16

6-3/16

3

4-1/2

3/8-16 x 3/8

3-3/4

4

1/8

16

FP 8 RD

8-1/8

8

3

4-1/2

3/8-16 x 3/8

3-3/4

4

1/8

25

FP 10 RD

10-1/4

10

3-3/4

8

3/8-16 x 5/8

6-3/4

4

1/8

49

FP 12 RD

12-1/8

12

3

8

3/8-16 x 3/8

7

4

1/8

63

 

 

ROTARY PARALLELS AND V-BLOCKS

 

Features:

  • FURNACE BRAZED - will not come apart when machined, sawed or formed.
  • LAMINATIONS - 1/16 iron- 1/16 standard stainless steel for high magnetic permeability.
  • HOLDS ODD shapes and sizes for grinding inspection.

 

These accessories increase the versatility of your magnetic chucking equipment. They extend chuck's magnetic holding power above working surface. Auxiliary plates can be made to match pole dimensions of present chuck with horizontal or vertical poles

 

ORDERING INFORMATION
 

PARALLEL BARS

HEIGHT IN INCHES

WIDTH IN INCHES

LENGTH IN INCHES

1/2

1

3

1/2

1

6

1

2

3

1

2

6

1

4

6

1

4

8

 

ORDERING INFORMATION

 

V-BLOCKS

HEIGHT IN INCHES

WIDTH IN INCHES

LENGTH IN INCHES

1-7/8

3-1/2

3-1/2

2-1/4

6

6

 

 



 

 

Home | Lifts | Filters | Sweepers | Chucks and Sine Plates | Rectifier Controllers | Electromagnets | Repair Facilities | Contact
Magnetool, Inc.  Phone: 248-588-5400   Fax: 248-588-5710
© 2002-2004 Copyright Magnetool Inc. Developed by Miller Media Inc 248-528-3600