Magnetool Inc. HomeLiftsElectromagnetic Filters Electromagnetic SweepersElectromagnetic Chucks and Sine PlatesElectromagnetic Rectifier ControllersElectromagnetsElectromagnetic Repair FacillitiesMagnetool Contact Information

Chucks and Sine Plates: Magnetic Sine Plates

You are here: Home | Chucks and Sine Plates | Permanent Magnetic Sine Plates

 

Precise angular setups are quickly made with this MAGNETOOL's Permanent Magnetic Sine Plates. Look up required angle in table below, make appropriate gage block combination, insert gage blocks in place and lock sine.

 

Magnetic Chucks are made with high power Ceramic magnets which never lose power. Top plates are steel and stainless steel furnace brazed into a single solid plate. Standard pole spacing is 3/8". Pole spacing of 1/8", capable of holding thin as well as thick pieces, is also available. The MSP363 has pole spacing of 1/4" only.

 

Tolerance in squareness, parallelism and between rolls on 363 and 66 is .0002; 612 is .0003; 618 is .0004. Plates and rolls are made of SAE .8620 steel carburized and hardened to 58-60 Rockwell "C" scale.

 

ORDERING INFORMATION


STANDARD POLE - SINGLE ANGLE

MODEL

SINE

SURFACE AREA

HEIGHT IN INCHES

WEIGHT LBS.

MSP 363-5

5.000

18

3-7/8

16

MSP 664-5

5.000

36

4

29

MSP 612-5

5.000

72

4-1/4

65

MSP 612-10

10.000

72

4-3/4

65

MSP 618-5

5.000

108

5-3/8

140

MSP 618-15

15.000

108

5-3/8

140

MSP 1212

10.000

144

4-3/4

155

Model MSPF 664-5 Permanent Magnetic Sine Plate

Model MSP 612-10 Permanent Magnetic Sine Plate

 

Model MSP 363-5 Permanent Magnetic Sine Plate

 


 

ORDERING INFORMATION

 

STANDARD POLE - COMPOUND ANGLE

MODEL

SINE

SURFACE AREA

HEIGHT IN INCHES

WEIGHT LBS.

MSPC 665

5.000-5.000

36

5

37

MSPC 612

5.000-10.000

72

5-3/4

85

MSPC 618-5

5.000-15.000

108

7-1/4

176

MSPC 1212

10.000

144

6-5/8

200


Model MSPC 612 Permanent Magnetic Sine Plate
 


 

ORDERING INFORMATION

 

FINE POLE - SINGLE ANGLE

MODEL

SINE

SURFACE AREA

HEIGHT IN INCHES

WEIGHT LBS.

MSPF 664-5

5.000

36

4

29

MSPF 612-5

5.000

72

4-1/4

65

MSPF 612-10

10.000

72

4-3/4

65

MSPF 618-5

5.000

108

5-3/4

148

MSPF 618-15

15.000

108

5-3/4

148

MSPF 1212

10.000

144

4-3/4

155


Model MSP 612-5 Permanent Magnetic Sine Plate


 

ORDERING INFORMATION

 

FINE POLE - COMPOUND ANGLE

MODEL

SINE

SURFACE AREA

HEIGHT IN INCHES

WEIGHT LBS.

MSPCF 665

5.000-5.000

36

5

37

MSPCF 612

5.000-10.000

72

5-3/4

85

MSPCF 618-5

5.000-15.000

108

7-1/2

184

MSPCF 1212

10.000

144

6-5/8

200


Model MSPC 665 Permanent Magnetic Sine Plate

 


 

 

 

Home | Lifts | Filters | Sweepers | Chucks and Sine Plates | Rectifier Controllers | Electromagnets | Repair Facilities | Contact
Magnetool, Inc.  Phone: 248-588-5400   Fax: 248-588-5710
© 2002-2004 Copyright Magnetool Inc. Developed by Miller Media Inc 248-528-3600