Chucks and Sine Plates:

Grid Pole Electromagnetic Chucks

You are here: Home | Chucks and Sine Plates | Grid Pole Electromagnetic Chucks

Grid Pole Chucks are for general purpose use on medium or large grinders. These electromagnetic chucks utilize rectangular pole pieces of one polarity with the matrix being the opposite polarity. This provides evenly distributed magnetic holding over the entire surface of the chuck.

Grid style chucks are designed to hold workpieces that are large enough to span more than 1 pole piece and can be used for light milling applications.

• All chucks are wired for 110/220 VDC dual voltage input

• All chucks utilize watertight construction

ORDERING INFORMATION   POLE DATA SERIES E F G G 1-3/8 1/2 3/16 EG 2 3/4 1/4 H 2 3/4 1/4 EH 3-1/4 1-1/4 3/8 EG & EH optional for large workpieces CHUCK CONTROLS CLICK HERE to get more information about Manual Rectifier Controllers CLICK HERE to get more information about Automated Rectifier Controllers

ORDERING INFORMATION

TO ORDER: Specify Model No. & Pole Style. Ex: ECG1236-G

 

GRID POLE ELECTROMAGNETIC CHUCKS SPECIFICATIONS

MODEL	POLES	WATTS	A	B	C	D
ECG1015	G or EG	104	10	15	5	17
ECG1024	G or EG	165	10	24	5	26
ECG1030	G or EG	206	10	30	5	32
ECG1048	G or EG	330	10	48	5	50
ECG1060	G or EG	413	10	60	5	62
ECG1224	G or EG	198	12	24	5	26
ECG1230	G or EG	248	12	30	5	32
ECG1236	G or EG	297	12	36	5	38
ECG1240	G or EG	340	12	40	5	42
ECG1248	G or EG	396	12	48	5	50
ECG1260	G or EG	495	12	60	5	62
ECG1424	G or EG	231	14	24	5	26
ECG1436	G or EG	347	14	36	5	38
ECG1448	G or EG	462	14	48	5	50
ECG1460	G or EG	585	14	60	5	62
ECG1624	G or EG	264	16	24	5-1/4	26
ECG1636	G or EG	396	16	36	5-1/4	38
ECG1648	G or EG	535	16	48	5-1/4	50
ECG1660	G or EG	660	16	60	5-1/4	62
ECG1824	G or EG	297	18	24	5-1/4	26

ORDERING INFORMATION

TO ORDER: Specify Model No. & Pole Style. Ex: ECG1236-G

GRID POLE ELECTROMAGNETIC CHUCKS SPECIFICATIONS

All dimensions are in inches.
NOTE*60" is the maximum chuck length. For larger sizes use combinations of the listed sizes.